Kidlington, OxfordshireInfo@dpl-electrical.co.ukMon–Sat 8am–5pm · Sun 8am–1pm

Info@dpl-electrical.co.uk

ServicesService AreasAboutOur WorkReviewsContactInfo@dpl-electrical.co.ukRequest Estimate

HomeServicesComplete Commercial RewiresCommercial Rewires · Oxfordshire · Phased to trading hours

# Complete commercial rewires in Oxfordshire,delivered phase-by-phase without closing the doors.
Full premises rewires for shops, offices, hospitality and light-industrial units across Oxford, Kidlington and the wider county. Phased around your trading week, certified to BS 7671, with insurance-ready paperwork and out-of-hours working as standard.

Get My Free Quote 07479 274302 Info@dpl-electrical.co.uk

NAPIT Registered · £10m PL · Out-of-hours rewires · over 25 years across Oxfordshire commercial premises.

At a glance

- ProgrammePhased to trading
- HoursEvenings · overnight · Sun
- DistributionSingle or three-phase
- HandoverNAPIT + EICR + logRequest Estimate

NAPIT Registered

£10m Public Liability

25+Years Experience

Out-of-Hours As Standard

Insurance-Ready Paperwork

Service Overview

## Rewire the premises — keep the till ringing.
A commercial rewire replaces the entire fixed wiring system of a non-domestic premises — sub-mains, distribution, lighting, power and emergency systems. Phased properly, it’s done while you trade. Phased badly, it costs more in lost takings than the rewire itself.

What it isTotal replacement of fixed wiring, distribution boards, sub-mains, accessories, lighting, emergency lighting and (where required) data containment in a commercial unit. Delivered to BS 7671 and BS 5266-1, certified on completion, and lodged on your fire-risk assessment file.

Who it&#x27;s forIndependent retailers, hospitality operators, salons and clinics, office tenants, light-industrial occupiers and commercial landlords across Oxford, Kidlington, Witney, Banbury and Bicester who need a non-trivial premises rewire — either by choice or because the EICR demands it.

When it&#x27;s neededAfter a Category 2 failure on the periodic EICR, at lease take-on for a tired older unit, before a major refit when partial rewires would just sit alongside obvious failures, after a fire or flood event, or as part of a planned premises upgrade timed to a quiet trading period.

Why professionalCommercial fixed wiring is inspected by the insurer at renewal and by the fire-risk assessor on cycle. A partial rewire leaves the weakest link untouched — and that’s what fails. A full rewire resets the entire installation to one standard, with one certificate, against which everything else can be audited.

Why It Matters

## A failed EICR doesn’t wait for your trading calendar.
The commercial rewires we’re asked for most urgently are the ones that should have been planned 12 months earlier. By the time the insurer writes or the fire officer visits, every option is the expensive option.

If you ignore it

- Insurance cover suspended until rewire complete — you carry the risk of fire or theft personally in the meantime.
- Forced closure under fire-officer enforcement — lost trading days, lost staff hours, lost goodwill.
- Premium rush-job pricing — full day rates instead of planned overnight work.
- Lease hand-back held up — landlord refuses the keys until a current EICR is produced.
- Cascading failures during emergency partial works — patched accessories triggering further C2 codes.

Common mistakes

- Trying to keep a 30-year-old MEM distribution board because ‘it still works’.
- Letting a domestic electrician quote on a three-phase commercial job — wrong cable, wrong board, wrong certificate format.
- Ignoring emergency lighting until the fire-risk assessor flags it — then paying the rewire and the emergency-lighting retrofit twice.
- Booking the rewire across the Christmas trading peak because ‘we can do without till Boxing Day’.
- Accepting the cheapest quote without a specification — it always omits SWA sub-mains, board labelling, or emergency-lighting commissioning.

Our Process

## Five-stage phased commercial rewire.
Every commercial rewire runs to the same plan: survey, phasing agreement, phased first-fix, phased second-fix, certified handover. We never close your doors.

- 01
### Premises survey &amp; phasing plan
On-site visit to map existing supply, distribution and equipment loads. We agree the phasing in writing before quoting.

- 02
### Fixed-price proposal with phasing dates
Itemised quote covering each phase, with the out-of-hours premium shown separately. Fixed price, valid 30 days.

- 03
### Phased first fix
Cables and containment installed overnight or out-of-hours — sub-mains, ring finals, lighting circuits, emergency lighting wiring.

- 04
### Phased second fix &amp; energising
New distribution boards energised section by section, accessories dressed, emergency lighting commissioned.

- 05
### Test, certify, file
BS 7671 test on every new circuit, BS 5266-1 commissioning on emergency lighting, NAPIT certificates + distribution schedule + log book in your inbox.

The Benefits

## What a properly phased rewire delivers.
Six outcomes a commercial occupier or landlord can take straight to their insurer, landlord or board.

### Zero closure days
Phased overnight working keeps the doors open. Most rewires hand back each morning before staff arrive.

### Insurance-grade safety
BS 7671 fixed wiring, BS 5266-1 emergency lighting, metal-clad accessories, properly rated MCBs and RCBOs.

### Decades of longevity
Commercial-spec materials with a design life of 25–30 years and EICR-friendly documentation throughout.

### Energy &amp; running-cost savings
Combined with LED relighting and PIR control, a rewire often cuts the lighting bill by 60–80%.

### Reliable continuity
Properly labelled distribution boards, accessible isolation, documented circuits — future faults found in minutes.

### Director peace of mind
EAWR 1989 compliance, BS 7671 compliance, fire-risk file complete — personal exposure as a duty-holder closed off.

Specifics &amp; Detail

## What a commercial rewire actually involves.
Commercial rewires are heavier, longer and more documented than their domestic equivalents. Here’s what changes when the certificate has to satisfy a commercial insurer.

### Materials we install

- SWA armoured sub-mains and external runs
- Hager three-phase distribution boards with labelled schedules
- Galvanised steel containment, basket tray and dado trunking
- Metal-clad MK accessories rated to commercial impact (IK10)
- Channel/Hochiki emergency luminaires commissioned to BS 5266-1
- Wieland plug-and-play lighting for fast retro-fit phases

### Methods &amp; standards
Sub-mains sized against the actual measured load with allowance for harmonic distortion. Containment installed before cabling — never reverse-engineered. Boards labelled with a printed schedule and a colour-coded as-installed drawing. Emergency lighting commissioned with a 3-hour discharge test recorded in the site safety log book.

### Variations of the service

- Shop &amp; retail full premises rewire
- Hospitality full rewire (kitchen, FoH, back-of-house)
- Office floor-plate rewire (single tenant or multi-tenant)
- Salon &amp; clinic full rewire with treatment-room circuits
- Light-industrial / workshop rewire with three-phase drops
- Landlord pre-let full rewire on take-back

### Where this service applies
Oxford city-centre retail, Bicester and Kidlington trading estates, Witney commercial parks, Banbury industrial units, hospitality on the A40 corridor and clinic suites across north Oxfordshire — anywhere a commercial occupier needs a full, certified, phased rewire.

Residential

Domestic rewires use twin-and-earth, plastic accessories and a single-phase consumer unit. Phased room-by-room with the family in residence. See our domestic rewires page for detail.

Commercial

Commercial rewires use SWA sub-mains, three-phase distribution where loads demand it, metal-clad IK-rated accessories, BS 5266-1 emergency lighting, and an insurance-ready certificate chain. Phased to trading hours, not to family routine.

Frequently Asked

## Straight answers, before the visit.
Can&#x27;t see your question? Ring the team on 07479 274302 — five-minute call, no obligation.

 07479 274302 Info@dpl-electrical.co.ukRequest Quote

How much does a commercial rewire cost?Commercial rewires are priced per premises — too variable for a flat rate. Indicative pricing: small retail unit £6,500–£11,000; mid-size office floor £14,000–£28,000; light-industrial unit £18,000–£40,000+. Fixed price after a free on-site survey.

Will we have to close to trade?

How long will a commercial rewire take?

Will the new install satisfy our insurer?

Can you handle three-phase distribution?

Do you include emergency lighting?

How long will a commercial rewire last?

Can you respond to an emergency commercial rewire?

Related Services

## Often booked alongside
Commercial Electrical Installation

Office, retail and industrial installs delivered to commercial standards, with minimal disruption to your team.

Landlord EICRs

Statutory landlord electrical safety certificates issued promptly — protect your tenants and stay legally compliant.

Electrical Emergency Call-outs

Fast local response across Oxfordshire when power, sockets or circuits fail — usually on site the same working day.

Electrical Maintenance

Scheduled testing, fault finding and remedial work that keeps your home or business running safely.

Local Coverage

## Complete Commercial Rewires across Oxfordshire
Same crew, same standard — covering Kidlington and the surrounding towns from a single Oxfordshire base.

- Complete Commercial Rewires in Oxford8 miles
- Complete Commercial Rewires in Witney10 miles
- Complete Commercial Rewires in Banbury22 miles
- Complete Commercial Rewires in Bicester7 milesAll areasContact

Book Complete Commercial Rewires

## Commercial Rewire — surveyed, quoted and fitted by the same Oxfordshire crew.
Free written estimate. No deposit. No call centre. Call before midday and we’ll be on site the same working day across Oxford, Witney, Banbury, Bicester and the wider Oxfordshire area.

Request My Estimate 07479 274302 Info@dpl-electrical.co.uk

NAPIT-registered electricians, covering Oxfordshire and surrounding counties — fast local response.

07479 27430207528 364996 AltInfo@dpl-electrical.co.ukSouth Ave, Kidlington, OX5 1DQ

Opening Hours

Monday8am–5pm

Tuesday8am–5pm

Wednesday8am–5pm

Thursday8am–5pm

Friday8am–5pm

Saturday8am–5pm

Sunday8am–1pm

- 

Services

Domestic Electrical Installation
- Commercial Electrical Installation
- Landlord EICRs
- Complete Domestic Rewires
- Complete Commercial Rewires
- Consumer Unit Upgrades
- EV Charger Installation
- Electrical Emergency Call-outs
- Electrical Maintenance

Service Areas

- Oxfordshire
- Buckinghamshire
- Berkshire
- Wiltshire
- Gloucestershire
- Oxford
- Witney
- Banbury
- Bicester

Company

- About
- Our Work
- Reviews
- ContactNAPIT Registered Electrician

Company No. 11444366

© 2026 D.P.L Electrical Services. All rights reserved.

Privacy Policy·Terms &amp; Conditions·Cookie Policy·25+ Years Experience

 Call nowRequest Estimate